On windows vista, I usually give a minimum of 30GB-50GB space. However, over the development of technology and size of new programs, you may need bigger hard drive partition value used for the system. when windows is already installed, and you want to format the hard drive, the following steps to format the hard drive on windows vista:

1. Click on the Start menu
2. Then right click on Computer and select Manage menu
3. In “Computer Management”, click Disk Management which is located under the Storage menu.
4. The right hand will be seen a list of all drives.
5. Then select the drive you want to format, right click on the drive and select Format.
6. Then you give the name and then click OK. And please wait until formatting is complete.

Don’t forget to backup your data before formatting the hard drive, this is to maintain the security of your files when the system format is not going well. okay, I hope the steps and tips to format hard drive on windows vista is useful for you.

Related posts:

1. Steps How to Share Files Between Two Computers Some friends ask to me about how to share files...
2. 9 useful tweaks in Windows Vista From the latest operating system, Microsoft  Windows Vista has a...
3. Simple Steps to anticipate Virus There are a few simple steps to protect your computer...

After all it was certainly there, then take the following steps on both your computer:
The following for settings in Windows Xp :

• Click on the Start menu – Settings – Network Connections.
• Then enter into the Local Area Connection and right click.
• Choose Properties, and the Local Area Connection.
• Select Internet Protocol (TCP / IP) and press the Properties button.
• Select Following ip address. IP address 192.168.1. X (where x is a number 1-254 – this figure is for the local network. Since you have only two computers on your network, it is recommended that you use 1 and 2. Set her PC 1 ip 192.168.1.1 (192.168.1.2 for your computer second). in Subnet 255.255.255.0 (for both computers). and then press OK.

For those of you who use Windows Vista, use the following steps:

• Click on the Start menu – Connect To – View network computers and devices – and then Network and Sharing Center.
• Choose Properties, and the Local Area Connection Properties dialog box will appear. After that please you Select Manage Network Connections, then click Local Area Connection. Then press the Properties button, Local Area Connection Properties. The dialog box will appear.
• then Select Internet Protocol version 4 (TCP/IPv4) and press the Properties button. After that Internet Protocol (TCP / IP) Properties dialog box appears and then Select Following ip address. IP address 192.168.1. X (where x is a number 1-254 – this figure is for the local network. Since you have only two computers on your network, it is recommended that you use 1 and 2. Set her PC 1 ip 192.168.1.1 (192.168.1.2 for your computer second). in Subnet 255.255.255.0 (for both computers). and then press OK.

Furthermore, after you finish configure both computers, Make a workgroup to a local computer network.
Steps If you are using Windows XP

• Open the System Properties using Win + Break.
• Then Select the Computer Name tab, click Change. Determining the computer name, select members of workgroup, and enter the name of the WORKGROUP (HOME on the picture below). After that rebbot / restart the PC. After that both PCs are connected to each other in a local network.
• And then To access it from another computer: press Start – Settings – Network Settings. Click My Network Places, click Entire Network, double-click Microsoft Windows Network, double-click HOME workgroup, the names of the PC will appear.

If you are using Windows Vista

• Open the System Properties using Win + Break, click Advanced system settings.
• Then, Select Computer Name tab, click Change.
• Determining the computer name, select members of the workgroup, and enter the name of WORKGROUP (HOME on the picture below), and then please reboot your computer. After that both your PC is already connected to each other in a local network.

Hopefully these tutorials you can understand easily, you may need to find various other sources about tutorials about local network computers. Hopefully useful.

Related posts:

1. ADHOC In the Ad-Hoc mode, to make interaction with other computers,...
2. Steps How to Format Hard Drive on Windows Vista One of the tips to keep in mind to reformat...
3. 9 useful tweaks in Windows Vista From the latest operating system, Microsoft  Windows Vista has a...

The software as it is somewhat irritating that many users have complained, but most of these parameters can be changed to your own taste.
9 useful tweaks in Windows Vista:

1. Disable UAC

In the User Account Control security instructions can be a bit boring. To disable the security on the issue:

* Control Panel > User Account and Family Safety > Turn User Account Control Off or On.

Note: Disabling UAC, reducing the security equipment. If your computer is to inexperienced users, it would be a good idea for the UAC turned on.

2. Start Menu icons do not turn on the power system

You may have noticed that the power icon in the Start menu does not shut down the computer, but sends him to sleep.

Making changes, go to:

* Click Start> Type “CMD” (this opens a command prompt)> type “powercfg.cpl.1″ (and this will open the advanced settings of office)> click on the + next to the “Power Buttons and Lid” field > click on the + next to the “Start Menu and Buttons” field > change the setting from “Sleep” to “Shut Down”.

3. Disable USB Wake

USB devices can sometimes make your computer “wakes up” if you do not want too. This is because the Vista default configuration of the computer power they say that if the USB device is connected to which can be useful, but can be painful. To disable this see:

* Device Manager> find the device that you do not want your computer, right-click and select Properties> under the Power Management tab, uncheck the option “Use this device to a computer” box.

4. Click Disable sound

If you have speakers on your computer, click on the sound effect is heard every time you made a choice, you can be very annoying. To disable this:

* Right-click on the speaker icon in the lower right corner of the screen> select Tones> scroll down and select “Start navigation”> in the drop-down menu “Sound”, select “No”.

5. Folder View Change

If the size of the icon view to come back later, you may find that the return to the original size. To change the size and type must be specified:

* Control Panel> Appearance and Personalization> Folder> View> down, and check “Remember each folder view” option.

Sometimes the installation folder may be damaged, if so, please click here:

* Start> type “Regedit”> Then navigate to HKEY_CURRENT_USER> Software> Classes> Local Settings> Software> Microsoft> Windows> Shell> click on “pockets”, and select Edit> Delete> Yes, remove the key and BagMRU, then reboot.

To avoid problems in the future, to increase the cache folder to see:

* HKEY_CURRENT_USER> Software> Microsoft> Windows> Shell> double click “BagMRU size” select “Decimal” and make it 10000. This is more of RAM, but in future it is necessary to prevent memory loss.

6. You can not say what would happen if I Defrag

A small bar is located in the Windows XP option to defragment the hard disk has been removed in Vista. This means that you do not know how long it will need to defragment. Unfortunately, the only real solution is to use third-party applications, such as power defragmenter.

7. Removed desktop icons

If you accidentally deleted a useful desktop with Windows Vista makes it easy to get them back:

* Right-click anywhere on the desktop> select Settings> then click “Change Desktop Icons” on the left pane, under the task> check the box next to the icon you want to restore.

8. After disabling the automatic reboot in Windows Update

Once your computer has installed the latest update Windows, you are prompted to restart your computer. You can restart a delay of 10 minutes to four hours, but you can also disable it forever. To do this, see:

* Start> type “CMD”, rather than press-Enter, instead press Ctrl + Shift + Enter> Type net stop “Windows Update” to automatically restart.

9. Fast Registration

If concern for the safety and speed that you are the only person using your computer, this may be the idea of applying for a password. To do this, see:

* Start> panel type userpasswords2 ‘> then uncheck the box next to “Users need a username and password to use the equipment.”

For me the only real problem with Windows Vista compatibility with audio and audio-visual products and software. If you have no need for this kind of applications, and that these parameters should be fine with Vista.

Related posts:

1. Steps How to Format Hard Drive on Windows Vista One of the tips to keep in mind to reformat...
2. Returns the USB Flash in the Disable / Write Protected Have a Flash Disk or External Hardisk with the USB...
3. Simple Steps to anticipate Virus There are a few simple steps to protect your computer...