After all it was certainly there, then take the following steps on both your computer:
The following for settings in Windows Xp :

• Click on the Start menu – Settings – Network Connections.
• Then enter into the Local Area Connection and right click.
• Choose Properties, and the Local Area Connection.
• Select Internet Protocol (TCP / IP) and press the Properties button.
• Select Following ip address. IP address 192.168.1. X (where x is a number 1-254 – this figure is for the local network. Since you have only two computers on your network, it is recommended that you use 1 and 2. Set her PC 1 ip 192.168.1.1 (192.168.1.2 for your computer second). in Subnet 255.255.255.0 (for both computers). and then press OK.

For those of you who use Windows Vista, use the following steps:

• Click on the Start menu – Connect To – View network computers and devices – and then Network and Sharing Center.
• Choose Properties, and the Local Area Connection Properties dialog box will appear. After that please you Select Manage Network Connections, then click Local Area Connection. Then press the Properties button, Local Area Connection Properties. The dialog box will appear.
• then Select Internet Protocol version 4 (TCP/IPv4) and press the Properties button. After that Internet Protocol (TCP / IP) Properties dialog box appears and then Select Following ip address. IP address 192.168.1. X (where x is a number 1-254 – this figure is for the local network. Since you have only two computers on your network, it is recommended that you use 1 and 2. Set her PC 1 ip 192.168.1.1 (192.168.1.2 for your computer second). in Subnet 255.255.255.0 (for both computers). and then press OK.

Furthermore, after you finish configure both computers, Make a workgroup to a local computer network.
Steps If you are using Windows XP

• Open the System Properties using Win + Break.
• Then Select the Computer Name tab, click Change. Determining the computer name, select members of workgroup, and enter the name of the WORKGROUP (HOME on the picture below). After that rebbot / restart the PC. After that both PCs are connected to each other in a local network.
• And then To access it from another computer: press Start – Settings – Network Settings. Click My Network Places, click Entire Network, double-click Microsoft Windows Network, double-click HOME workgroup, the names of the PC will appear.

If you are using Windows Vista

• Open the System Properties using Win + Break, click Advanced system settings.
• Then, Select Computer Name tab, click Change.
• Determining the computer name, select members of the workgroup, and enter the name of WORKGROUP (HOME on the picture below), and then please reboot your computer. After that both your PC is already connected to each other in a local network.

Hopefully these tutorials you can understand easily, you may need to find various other sources about tutorials about local network computers. Hopefully useful.

Related posts:

1. ADHOC In the Ad-Hoc mode, to make interaction with other computers,...
2. Steps How to Format Hard Drive on Windows Vista One of the tips to keep in mind to reformat...
3. 9 useful tweaks in Windows Vista From the latest operating system, Microsoft  Windows Vista has a...

.bat application is usually used for computer repair stricken destroyer programs. for example when the computer is not accessible in full, windows task manager can not be accessed, and some other access to based Windows computers.

batch program (. bat dos promt application) may also be used for use as a shortcut, so that we can automatically do the access, or the settings on your computer only use the program. for example, we’ll auto shutdown pc within a certain time, restart the computer, protect an important file, bios password reset, and other purposes you can do with application based dos promt.

Related posts:

1. Enable Task Manager CMD and regedit This article is for windows exposed by a virus which...
2. Chrome Based Computer Start Up Less Than 7 Seconds Google issued their latest software (Chrome), which can start up...
3. Introduction Batch Programming batch programming language is used by the Command Prompt (CMD),...

The software as it is somewhat irritating that many users have complained, but most of these parameters can be changed to your own taste.
9 useful tweaks in Windows Vista:

1. Disable UAC

In the User Account Control security instructions can be a bit boring. To disable the security on the issue:

* Control Panel > User Account and Family Safety > Turn User Account Control Off or On.

Note: Disabling UAC, reducing the security equipment. If your computer is to inexperienced users, it would be a good idea for the UAC turned on.

2. Start Menu icons do not turn on the power system

You may have noticed that the power icon in the Start menu does not shut down the computer, but sends him to sleep.

Making changes, go to:

* Click Start> Type “CMD” (this opens a command prompt)> type “powercfg.cpl.1″ (and this will open the advanced settings of office)> click on the + next to the “Power Buttons and Lid” field > click on the + next to the “Start Menu and Buttons” field > change the setting from “Sleep” to “Shut Down”.

3. Disable USB Wake

USB devices can sometimes make your computer “wakes up” if you do not want too. This is because the Vista default configuration of the computer power they say that if the USB device is connected to which can be useful, but can be painful. To disable this see:

* Device Manager> find the device that you do not want your computer, right-click and select Properties> under the Power Management tab, uncheck the option “Use this device to a computer” box.

4. Click Disable sound

If you have speakers on your computer, click on the sound effect is heard every time you made a choice, you can be very annoying. To disable this:

* Right-click on the speaker icon in the lower right corner of the screen> select Tones> scroll down and select “Start navigation”> in the drop-down menu “Sound”, select “No”.

5. Folder View Change

If the size of the icon view to come back later, you may find that the return to the original size. To change the size and type must be specified:

* Control Panel> Appearance and Personalization> Folder> View> down, and check “Remember each folder view” option.

Sometimes the installation folder may be damaged, if so, please click here:

* Start> type “Regedit”> Then navigate to HKEY_CURRENT_USER> Software> Classes> Local Settings> Software> Microsoft> Windows> Shell> click on “pockets”, and select Edit> Delete> Yes, remove the key and BagMRU, then reboot.

To avoid problems in the future, to increase the cache folder to see:

* HKEY_CURRENT_USER> Software> Microsoft> Windows> Shell> double click “BagMRU size” select “Decimal” and make it 10000. This is more of RAM, but in future it is necessary to prevent memory loss.

6. You can not say what would happen if I Defrag

A small bar is located in the Windows XP option to defragment the hard disk has been removed in Vista. This means that you do not know how long it will need to defragment. Unfortunately, the only real solution is to use third-party applications, such as power defragmenter.

7. Removed desktop icons

If you accidentally deleted a useful desktop with Windows Vista makes it easy to get them back:

* Right-click anywhere on the desktop> select Settings> then click “Change Desktop Icons” on the left pane, under the task> check the box next to the icon you want to restore.

8. After disabling the automatic reboot in Windows Update

Once your computer has installed the latest update Windows, you are prompted to restart your computer. You can restart a delay of 10 minutes to four hours, but you can also disable it forever. To do this, see:

* Start> type “CMD”, rather than press-Enter, instead press Ctrl + Shift + Enter> Type net stop “Windows Update” to automatically restart.

9. Fast Registration

If concern for the safety and speed that you are the only person using your computer, this may be the idea of applying for a password. To do this, see:

* Start> panel type userpasswords2 ‘> then uncheck the box next to “Users need a username and password to use the equipment.”

For me the only real problem with Windows Vista compatibility with audio and audio-visual products and software. If you have no need for this kind of applications, and that these parameters should be fine with Vista.

Related posts:

1. Steps How to Format Hard Drive on Windows Vista One of the tips to keep in mind to reformat...
2. Returns the USB Flash in the Disable / Write Protected Have a Flash Disk or External Hardisk with the USB...
3. Simple Steps to anticipate Virus There are a few simple steps to protect your computer...

DISK Defragmenter
• It is a program used to sort or sort out the files that are not neatly arranged. Usually these sort pogram files or file based on the priorities that are often used. After the defrag, the files are neatly arranged.

• Files that fall apart in a drive will prevent the system working, and in the drive capacity is usually required in order to empty the system does not easily damaged, capacity minimum is usually 15% of original capacity. In this case, the virus will be known as the file and follow made.

• Benefits of Disk Defragmenter:
1. Keeping the hard drive to run faster
2. Increase in the drive to recover data if you are experiencing crashes.

DISK CLEAN UP
• Disk Cleanup useful system for windows. Its main function is to clean some of the file system that is rare / not in use. This program ensures that the content of the hard disk is not full.

• With this program, the Windows System Restore usually takes a lot of hard disk capacity can be left blank.

• Files that are usually deleted:
1. Waste that is in the Recycle Bin
2. Temporary Files used during internet time

Related posts:

1. Tips to caring computer Perhaps at this time, the computer becomes an item that...
2. Optimize Windows xp computer Computer that is always smooth operation is ideal for every...
3. Introduction Batch Programming batch programming language is used by the Command Prompt (CMD),...

1. USE ASCII Character
ASCII character can be used to protect files and folders from virus attacks. Technical quite popular and powerful. Up to the time this article was written, the author know, all the computer viruses that spread all over the world there is no one who has to file with the protection against infection, but of course with the virus that made programming techniques that will be able to better penetrate this protective defense.

Example Usage:
- Technical Writing ASCII Character:
In the default keyboard, the Num Lock condition On / On, press and hold the “ALT”, and write Figures / Figures combination with the Numeric Keypad appropriate formula writing ASCII Characters, and then separated the “ALT”.
Example:
ALT + 1 = ☺
ALT + 2 = ☻
ALT + 3 = ♥
ALT + 4 = ♦
ALT + 5 = ♣
ALT + 6 = ♠
ALT + 7 = •
ALT + 8 = ◘
ALT + 9 = ○
ALT + 10 = ◙
ALT + 11 = ♂
ALT + 12 = ♀
ALT + 13 = ♪
ALT + 14 = ♫
ALT + 15 = ☼
ALT + 16 = ►
ALT + 17 = ◄
ALT + 254 = ■
ALT + 30 = ▲
ALT + 31 = ▼
ALT + 21 = §
ALT + 63 =?
ALT + 168 = ¿
ALT + 64 = @
ALT + 0169 = ©
ALT + 0153 = ™
ALT + 241 = ±
ALT + 247 = ¸
ALT + 0188 = ¼
ALT + 0189 = ½
ALT + 0190 = ¾
and so forth.

- Technical:
1 Create Folder, Rename, and by placing ASCII Character at the beginning of the folder name you have, eg: ♥ myDocuments,
or you can Name as you remain in accordance with the procedures / instructions above, for example:
♥ ☺ ~ ~ Rebert% twØrk ® ã ² ~% ~ ☺ ♥

- Finally, place the Files you want to protect in the folder.

2. Compress the file with Compressor with PASSWORD PROTECTION
Compress any data that you want to use protection WinRAR or WinZip or similar programs with other protection to give first compressed data with password.
Viruses are not only the difficulty / failure to compress files with password protection, but even the latest anti-virus does not / has not been able to penetrate the file when the file scanning.
Do not forget that the difficulty level of the structure of your password (a combination of long and short character password) influence the level of difficulty of piercing the file is protected.
Therefore, the long and varied structure of the characters a password (a combination of letters, numbers and special characters / symbols) will have the level of protection stronger.

3. Permission UAC SET WITH ACCESS TO PREVENT / WRITE / DELETE FILE AND FOLDER (VISTA)
On Windows Vista, we can set the security configuration on each file or folder with files in it using the Access Permission.
Technical protection files and / or folders:
- Right Click on the file and / or folders to be protected,
- Select and click Properties,
- Click the Security tab
- You add the single Users or the Users Group will be limited access (write / modify / copy / delete / etc.) On the file that will be protected,
- Set Permission according to your wishes.

Note: This protection technique is required Administrator access rights and UAC (User Account Control) is active for its implementation.

Related posts:

1. Simple Steps to anticipate Virus There are a few simple steps to protect your computer...
2. Analysis of virus attack virus is a program that is deliberately created by programmers...
3. Batch File Copy Folder Tricks This is the simple trick of batch file code to...

Flashdisk is the one of media most widely used in the spread of the virus.
At the time we insert a USB flash to the our computer, then by default windows will directly open the new task with the Auto play function.Many viruses use the Auto Play function is to spread themselves and then the virus-infected to our computer.
Here we will attempt to minimize the virus into the computer with us how to disable the Auto Play function is.

folowing the steps:
- Click Start -> run “gpedit.msc”
- Select Computer Configuration -> Administrative Templates
- Then Select System, locate the file Turn Off Auto Play and double click
- Then check the option enabled and Turn Off Auto select Play All Drive
- Then, click OK, Close and restart

Another way to minimize the virus into the computer is how to enable the Guest user, and login with the guest user.Because the Guest user is not directly then we will kill the registry, because the virus will always be to infections this registry file and change the value in it.
You can also minimize the virus into the computer with anti virus always update regularly.

Related posts:

1. Returns the USB Flash in the Disable / Write Protected Have a Flash Disk or External Hardisk with the USB...
2. Analysis of virus attack virus is a program that is deliberately created by programmers...
3. Enable Task Manager CMD and regedit This article is for windows exposed by a virus which...

Make sure you have the key (key) Windows XP valid.
The entire process will take approximately 1 / 2 or 1 hour, depending on your computer’s specifications.
If you are the administrator password, you should select the repair option (repair) the second, not the first.
Insert your Windows XP CD and booting from the CD to do it.
When the option is shown improvement both R = Repair, press R, this will start the repair.
Press the F8 to agree to process the next I Agree at the Licensing Agreement.
Press the R when the directory where you installed Windows XP. Usually C: \ WINDOWS Then do check drive C: and start copying files. And automatically restart if needed. Leave the CD in your drive.
Next you will see a progress bar images that are part of the improvement, he seem like normal XP installation usually includes Collecting Information, Dynamic Update, Preparing Installation, Installing Windows, Finalizing Installation. Then select Next.
When asked to enter a keyword, enter the valid key (key) your Windows XP.
Normally you want to remain in the domain or workgroup name the same.
The computer will restart. Then you will have the same screen as the system during normal installation.
Register if you want it (usually not needed). Done.

2. NTOSKRNL Damaged / Missing (Missing or Corrupt)

If you get error messages NTOSKRNL not found:
Insert the Windows XP CD and booting from the CD.
At the time shown R = Repair option first, press R.
Press the number corresponding to the location of the Windows installation that you want to regenerate the appropriate. Usually the number 1.
Move to drive the CD Drive you are.
Write: CD i386. Then write something like this: expand ntkrnlmp.ex_ C: \ Windows \ System32 \ ntoskrnl.exe.
If you installed Windows XP in place, then change according to location.
Remove your CD and type EXIT.

3. HAL.DLL Damaged or Missing (Missing or Corrupt)

If you get an error regarding the loss or damaged hal.dll file, it is likely one of the BOOT.INI file configuration (misconfigured).
Insert the Windows XP CD and booting from the CD.
At the time shown R = Repair option first, press R.
Press the number corresponding to the location of the Windows installation that you want to regenerate the appropriate. Usually the number 1.
Write: bootcfg / list. Function to display the contents / entries in the BOOT.INI file at this time.
Write: bootcfg / rebuild. Work to improve the configuration of the file BOOT.INI.
Remove your CD and type EXIT.

4. Directory \ WINDOWS \ System32 \ Config damaged

If you find any posts with the error:

Windows could not start because the following files is missing or corrupt: \ WINDOWS \ System32 \ Config \ SYSTEM or \ WINDOWS \ System32 \ Config \ SOFTWARE
Insert the Windows XP CD and booting from the CD.
At the time shown R= Repair option first, press R.
Press the number corresponding to the location of the Windows installation that you want to regenerate the appropriate. Usually the number 1.
Enter the administrator password if required.
Write: cd \ windows \ system32 \ config.
Next depends on the location where the occurrence of damage.
Write: ren software software.damaged OR system.damaged ren system.
Next again also depends on the location where the occurrence of damage.
Write: copy \ windows \ repair \ system.
Write: copy \ windows \ repair \ software.
Remove your CD and type EXIT.

5. NTLDR or NTDETECT.COM Not Found

If you find any posts with the error as above:
For FAT partitions

Please make your booting from the Win98 floppy and copy your files NTLDR or NTDETECT.COM i386 directory of the drive to master / root (root) C: \.
For NTFS partition

Insert the Windows XP CD and booting from the CD.

At the time shown R = Repair option first, press R.

Press the number corresponding to the location of the Windows installation that you want to regenerate the appropriate. Usually the number 1.

Enter the administrator password if required.

Enter the following command, where X: is the address of the CD ROM drive you (Customize!).

Write a COPY X: \ i386 \ NTLDR C \:

Write: COPY X: \ i386 \ NTDETECT.COM C: \

Remove your CD and type EXIT

Related posts:

1. Troubleshooting error on windows whether your computer error? your computer may experience an error...
2. Returns the USB Flash in the Disable / Write Protected Have a Flash Disk or External Hardisk with the USB...
3. How to install *.msstyles extension You can download UXTheme Universal Patcher v2.1.exe at http://softdoraemon.com/free-download/desktop-view/universal-uxtheme-patcher-21/, restart...

Following case example eror on device drivers of your PC:

STOP: 0xc000026C unable to load device driver Driver_Name

or

STOP: 0xc0000221 unable to load device driver Driver_Name

or

STOP: 0xc0000221. Bad image check sum, the image user32.dll is possibly corrupt. The header check sum does not match the computed check sum.

Error usually occurs on Windows XP on the system during the startup of your computer, and when a driver has been important ‘missing’ or corrupt. This error will appear if there is a file “User32.dll” a corrupt or ‘missing’. To fix this error, you can change the file that is corrupt. If you do not do this, you must reinstall the operating system back your Windows XP. To restore the damage or loss of a driver file User32.dll, I can see the following:

* You can enter the Windows XP installation CD into the CD-ROM and booting the PC to make sure booting from the CD come.
* In the “Welcome to Windows”, and press the letter R to open the “Recovery Console”. When the Recovery Console has been shown, you can run a command that is in the lower one by one, press Enter and type each command, and also change the name of the driver driver_name with the previous error.

cd windows \ system32 \ drivers
ren drivername.sys driver_name.old
copy F: \ i386 driver_name

Note: Changing the F: drive with the letter of the CD-ROM drive.
Finally, you can exit the Recovery Console, remove the Windows XP installation CD and restart your PC

If the error occurs in the user32.dll file, you can run the following instructions in the Recovery Console:

cd windows \ system32
ren user32.dll user32.old
expand F: \ i386 \ user32.dl_ c: \ windows \ system32 \ user32.dll

If you still can not fix the error with the instructions above, you can repair your installation of Windows XP. You can do this by selecting the option that is on display “Welcome to Windows”, which appear when booting a PC from Windows XP installation CD.

To prevent software or drivers that can make your computer system error, you can run several prevention. You can use the antivirus and antispyware tool with the latest update and run the scanning routine to ensure that your PC is not infected with the virus or the like. You should also keep the PC and your work environment, with open and clean your PC and the periodic check that all connectors and the card was seated properly on the motherboard. Still, most importantly, make sure you can register your Windows error free registry cleaner tool with a reliable and efficient. and following article for the error in the taskmanager (to enable taskmanager, cmd and regedit)

Related posts:

1. Windows Recovery To Recover Lost Windows Files One of Solution to recover lost data is used Best...
2. Improve the operating system without re-install following are some tips to improve the operating system without...
3. disable autoPlay from Gpedit if your computer have a problem on the windows (troubleshooting...

following the steps to overcome the problems:

To enable Task Manager:
1. Click Start -> Run
2. Then just copy-script below …

Reg add HKCUSoftwareMicrosoftWindowsCurrentVersionPoliciesSystem / v DisableTaskMgr / t REG_DWORD / d 0 / f (written in one line)

3. TaskManager usually can be opened directly, but if TaskManager you can not open, please restart your computer …

To enable Registy Editor (regedit):
1. Click Start -> Run
2. Then just copy-script below:

Reg add HKCUSoftwareMicrosoftWindowsCurrentVersionPoliciesSystem / v DisableRegistryTools / t REG_DWORD / d 0 / f (written in one line)

3. Restart your computer, if regedit is still not open

To activate the Command Prompt:
1. Click Start -> Run
2. Then just copy-script below:

Reg add HKCUSoftwarePoliciesMicrosoftWindowsSystem / v DisableCMD / t REG_DWORD / d 0 / f

solutions are not necessarily 100% able to complete the problems on the computer affected by a virus program. virus programs also sometimes does not turn off all of that. because each virus has a different logic program and a different destination, as well as systems that use the virus. but most of the virus program is disable “Task Manager”, CMD (Command Promt) and Regedit. why? because, using taskManager we can see all the processes running on the computer, and using “Task Manager” usually user computer can turn off the virus process. it is one of the reasons for a virus to disable Task Manager. as well as regedit and CMD both have important roles to make the settings in the windows.

Related posts:

1. disable autoPlay from Gpedit if your computer have a problem on the windows (troubleshooting...
2. Returns the USB Flash in the Disable / Write Protected Have a Flash Disk or External Hardisk with the USB...
3. 9 useful tweaks in Windows Vista From the latest operating system, Microsoft  Windows Vista has a...

The characteristics of the file you should suspect is as follows:

1. As the folder icon but have extensions such as *. exe or *. scr and have size when viewed with the display
Details.To view details on the Explorer click View> Details.

2. Have a name similar to the name of the file or folder that we have.

3. Measuring not more than 1 Mb and even less than 1oo Kb.

4. icon has a strange and not according to the extension, for example, illustrated Adobe Acrobat Reader, Microsoft Office Ducument (doc), or a picture but have the extension exe.

For the virus came from the internet, usually we will given a warning by Google when we search with Goole search engine, for more secure install a firewall and antivirus. Still to be more safe or defense last level, install the anti-trust you and do not forget to always get the updates up to date.

Related posts:

1. Protect files and folder from virus attactks once we know how to anticipate the virus, how to...
2. Analysis of virus attack virus is a program that is deliberately created by programmers...
3. Steps How to Share Files Between Two Computers Some friends ask to me about how to share files...