MS-DOS to reset BIOS password
than can be used to create a detection files, changes the attribute files, shutdown automatically. CMD/BIOS also can use to reset BIOS password computer. use the CMD we do not need to open the battery CMOS to reset BIOS password.
BIOS password is usually used to protect the user on the computer BIOS settings. And if you want to reset the password on the BIOS does not need to hard-to-difficult to connect its battery CMOS, with a few tricks on DOS, you can reset the BIOS password. How: reboot the computer and run with the MS-DOS mode, use the “command prompt only”. At the
C: \>
C: \>DEBUG
hit/press enter on your keayboard. You will see the sign (-) at the DEBUG prompt. Then type:
0 to 70 2e DEBUG prompt will be displayed as -0 70 2e. Press enter and type: 0 71 ff press enter, the last, type: Q and press enter, then you will exit from the DEBUG prompt and return to the C: \> prompt. Now you try to enter the BIOS then the BIOS password has open.
Manual way to reset the BIOS password is a way to disassemble the BIOS battery is located on the computer motherboard (at CPU). but with the way this manual is need a lot of time, because we have to open the CPU hardware first.
Related posts:
- New Trojan lurking for Password whether you are often exposed to the virus? be careful...
- Introduction Batch Programming batch programming language is used by the Command Prompt (CMD),...
- Improve the operating system without re-install following are some tips to improve the operating system without...
- 9 useful tweaks in Windows Vista From the latest operating system, Microsoft Windows Vista has a...
- Returns the USB Flash in the Disable / Write Protected Have a Flash Disk or External Hardisk with the USB...
||