Windows Memory Diagnostic will be executed, a 3.5-inch diskette or CD-ROM. Microsoft, the supplier of utility services, is a documentation of the utility, but it is not necessary to go through the lengthy details. This is a brief guide on how to install Windows Memory Diagnostic in the 3.5-inch diskette or CD-ROM and run the memory test.

- Download Windows Memory Diagnostic installer to install mtinst.exe.
- Starting mtinst.exe run Windows Memory Diagnostic Setup.
- Click on one of two options:
1. Create a boot disk to install Windows Memory Diagnostic RAM tester to write directly to a floppy disk.
2. Save the CD image on your hard drive if you have a CD-ROM, which can be used to start the computer.
- If you need to create a boot disk, insert a formatted floppy disk into the drive, and then select the drive from the list. Finally, click Create. When installation is complete, the success of a window.

If you opt for the CD to save the image, select the folder for the ISO-9660-image, and then click Save. If the file is saved, the success of a window. Then burn an ISO image to a blank disc.
- Turn on your computer.
- Remove all memory except for a cane.
- Restart the computer.
- Install the Windows Memory Diagnostic disk or a floppy disk in the floppy drive or CD / DVD-ROM.
- Make sure the boot order in the BIOS of the motherboard is configured to boot from a floppy or CD-ROM or DVD-ROM, rather than on the hard disk.
- Windows Memory Diagnostic is loaded and there is an interface. After loading, the first test pass begins and continues until complete, unless you pause or exit Windows Memory Diagnostic. After the first test, which includes a series of 6 tests completed, report whether the weapons of mass destruction, other errors or malfunctions. If errors are not displayed well.

If they can not be a piece of memory may be corrupted. You can try to shut down the computer and then insert the memory module into the slot, or move it to another slot and run the test again. It is also possible, T button to activate and run a thorough test.
- If the problem is found, press X on the test.
- Insert the sample RAM module (which may or may not want to remove the module before the test, but if not eliminate, or add the new plant will be found guilty if the error message).
- Restart the computer with the memory test floppy disk or CD-ROM set, and repeat the test once again.

Related posts:

1. How to Increase Your Computer’s RAM Many owners want their teams Memory (RAM) to improve the...

||

The increase in computer memory, also known as “the improvement of the computer’s memory.” Memory upgrade is quite easy (if you know the basic procedures and safety measures to be undertaken before, see above). it’s important if you love playing a game like http://playnickelodeongames.com/dora-games.html

There are many types of RAM for the desktop: Edo (no longer produced and modern PCs), SDRAM, DDR1 and DDR2. These four species are usually those that a modern computer like mine, and maybe you. Currently I have two tables 512 MB DDR PC2700 memory modules. They are comparatively cheaper than their DDR2, despite the fact that my motherboard allows you to use DDR1 (or DDR) and DDR2 memory types. To determine which type of memory required for installation on the motherboard, so check the manual before using your memory, you will see that doing the right thing.

From the perspective of the operating system, you can IMAC memory your Macintosh, as well as Windows-based computer system.

Adding RAM is fairly simple, but beware of some danger. I believe that you follow these simple steps, if you want to do it themselves.

- Disconnect all cables (power cord, mouse, printer, etc.) on the processor before attempting to open it. Do not open or separate from the processor with the cables at the rear. All cables on the back can get a static electricity, the internal components of short-term.
- Wear shoes or slippers. Do not let your feet touch the ground to touch the parts of the processor. Again, this is not to short-circuit components.
- Gloves. I prefer to surgical gloves, which are made of plastic. Plastic gloves are good. Keep in mind that it fits perfectly in your hands. A pair of over-sized gloves make you feel uncomfortable or damaged components without your knowledge. Remember that this is a very small here.
- Use antistatic bracelets (if you have one). You can use it on the mat to electrostatic discharges.
- When you remove memory modules, do not press too much on the clips, which support it, because it could be motherboard. Avoid clicking on any part of the board. In some areas, can be solved, and maybe your board is not functioning, then sooner or later.
- Make sure that the damage or corrosion on the pins the memory module before installing the memory slots on the motherboard. You can also clear the memory slots with a soft brush that dirt and dust.
- Install a new cable (and other cables that are removed before using the memory modules) for your processor. A power before doing the test for the processor, the new memory is working well.
- If something goes wrong and you are not sure what is wrong, call a qualified technician. Do not try to experiment on the computer that is not part of the fact that it can damage the parts or components. This could save a lot of money.

Related posts:

1. Computer maintenance tips Running happily for many years without much maintenance. All, with...
2. PC cleaning Tips Always believe that your computer fan is run continuously? He...

||